Spring Cone Crusher
Spring Cone Crusher
Feeding Size：≤278（mm）
Capacity：18-725（t/h）
Application Fields：Quarry, concrete mixing station, dry mixed mortar, power plant desulfurization, quartz sand, etc
Applied Materials：Pebbles, gravel, granite, diabase, basalt, quartz, limestone, iron ore, coal gangue, etc
Features and technology advantages of Spring Cone Crusher
Introduction of Spring Cone Crusher
Spring cone crusher is the earliest cone crusher, which is an advanced crusher with high power, large crushing ratio and high productivity.It is suitable for fine crushing and ultra-fine crushing of hard rocks, ores, slag, refractories, iron ores, copper ores, limestone, quartz, granite, basalt, diabase, etc.
Spring cone crusher can be widely used in metal and nonmetal ore, cement factory, building industry and metallurgy industry, which is suitable for sand, iron ore, non-ferrous metal ore, granite, limestone, quartz rock, sandstone and pebbles. It is the preferred cone crusher in building, mine and coal industry.
1. Increase eccentricity and improve processing capacity.
2. Speed up, increase power and improve crushing fineness.
3. Raise the swing center of the moving cone and optimize the cavity design.
4. The lining plate is thickened to extend the service life.
5. The hydraulic motor replaces the hydraulic push rod device, and the ore discharge opening is accurately and continuously adjusted. The cone assembly is removed in 10 minutes.
6. High output and fine ore content.
7. The key components are made of high-strength materials, with proper weight increase and better reliability.
Working principle of Spring Cone Crusher
Users can select different cavity types according to different needs. The machine is sealed with lubricating grease, which avoids the defects of water supply and drainage system easy to block and water oil easy to mix. The spring safety system is an overload protection device, which can make foreign matters and iron pieces pass through the crushing chamber without harming the crusher. The machine is divided into standard type and short head type. Generally speaking, the standard type has large feeding particle size and coarse discharging particle size. The short head type has steep crushing cone and small feeding particle size, which is conducive to the production of fine particle materials. Therefore, the standard type is generally used for coarse and medium crushing, and the short head type is used for medium and fine crushing.
Product Data
Technical Data of Spring Cone Crusher：
| Model | Moving cone diameter (inch) | Cavity type | Size of feeding port(mm) | Outlet size(mm) | Spindle speed(r/min) | Motor power(kw) | Capacity(t/h) | Weight(t) | Dimension(mm) | |
| Closed edge(mm) | Open edge(mm) | |||||||||
| SZTY900 | 900(3′) | Fine type | 83 | 102 | 9-22 | 580 | 75 | 45-91 | 15 | 2821×1880×2164 |
| Coarse type | 159 | 175 | 13-38 | |||||||
| SZTY1200 | 1200(4′) |
Fine type |
127 | 131 | 9-31 | 485 | 110 | 63-188 | 20 | 2821×1880×2164 |
|
Medium-sized |
156 | 156 | 13-38 | 100-200 | ||||||
| Coarse type | 178 | 191 | 19-51 | 141-308 | ||||||
| SZTY1295 | 1295(4.25) | Fine type | 109 | 137 | 13-31 | 485 | 160 | 109-181 | 27 | 2800×2342×2668 |
| Medium-sized | 188 | 210 | 16-38 | 132-253 | ||||||
| Coarse type | 216 | 241 | 19-51 | 172-349 | ||||||
| SZTY1650 | 1650(5.5) | Fine type | 188 | 209 | 16-38 | 485 | 220 | 181-327 | 55 | 3911×2870×3771 |
| Medium-sized | 213 | 241 | 22-51 | 258-417 | ||||||
| Coarse type | 241 | 268 | 25-64 | 299-635 | ||||||
| SZTY2134 | 2134(7′) | Fine type | 253 | 278 | 19-38 | 435 | 315 | 381-726 | 110 | 4631×3251×4732 |
